Site Overlay

How To Reset A Smart TV Remote

Has your smart TV remote developed any fault lately? If yes, what you need to do is to reset it. Resetting the smart tv remote is quite easy, and can be performed by few people. In this guide, we would be looking at how to reset a smart tv remote. As you read through, do well to take cognizance of the main points.

How you reset your smart TV remote depends on the functionality you are attempting to restore, the type of remote you have, and whether you have gone through the typical troubleshooting steps.

What is Smart TV

A Smart TV is a television set that has connects to the internet and allows the users to use services like video streaming, web browsing/surfing, or even gaming.

Smart TV allows access to traditional electronic media (regular television channels) along with online interactive media and ‘Over The Top’ (OTT) content. It also allows home networking solutions such that all devices and be interconnected and be operated with a single click.

Some of the more popular apps that you, the user can have access to, via a Smart TV, including Netflix, Spotify, YouTube, Amazon.

Common issues with the Smart TV Smart Remote.

Nowadays, TVs aren’t just a screen and transmitter, but a full-fledged computer, so software issues are becoming common now. The most common issue is the problem with unresponsive remote commands. Your remote responds only to the turn on/off button, but doesn’t respond to any other buttons.

Since the TV is a computer, software problems may occasionally occur. Most Smart televisions have the next failure when controlling a remote control. The remote control can only turn the TV on or off. No more commands from the remote will answer the TV.

That’s because the turn on/off button works through the infrared signal, so you should point your TV remote towards the TV and press the power button. Once the TV is turned off, your smart remote starts working through the Bluetooth connection, so if there are some problems with the Bluetooth connection – it won’t be working.

However, the connection issues aren’t the only reason that may make your Smart remote not working. In general, the problems are caused by something listed below:

  • Problems with Bluetooth or infrared signal;
  • Problems with remote batteries;
  • A program error;
  • A defective remote or TV’s remote sensor issues.

Smart TV Remote Not Working

There are a few reasons why your Smart TV remote may appear not to be working. You can fix many of these by troubleshooting. Your remote may stop working if the batteries in the remote are drained. Fix the problem by putting a new set of batteries in the remote

The Smart TV remote may also stop working due to an electronic glitch in the remote. This can be fixed by removing the batteries, pressing a button on the remote to drain any remaining power, and then replacing the batteries. Your remote should now function correctly.

Another common thing that can cause your remote to stop working is a failure to make contact with the IR sensor on your Smart TV.

Make sure no objects obstruct the bottom of the TV and then try to change the channel with the remote.

Reset Smart Remote Programming

You may want to reset a Smart TV remote to change the device it is programmed to control. Some Smart TV remotes can be programmed to control other devices such as a cable box, audio system, and DVD player.

Check the buttons on top of the remote to see if your Smart remote is capable of controlling other devices. If you see the CBL, AUX, and DVD buttons, your remote can be programmed for these devices.

Reset the remote programming by pressing the button for the device you want to program and then holding down the “Setup” button until the light either blinks or goes solid. Type in the code for your device, press the device button, and then touch “Power” to see if the device turns off or on.

If it doesn’t, repeat the process and try other recommended codes. You can find codes for your device by going to and looking up the manual for your specific TV remote.

The First Step to reset Smart Smart TV.

You should make sure that your Smart TV is switched off. This will be very important as far as the whole process is concerned. Ensure that you have done this before you embark on the below further procedures.

The Second Step. (Really important)

Make sure that you have your Smart Smart TV remote in your hands. Then after you have made sure that the TV is off, simultaneously press the following keys:

  • The Info key.
  • The Menu button.
  • The mute button.
  • And the Power button.

These four keys are to be pressed simultaneously, it is really important that you don’t forget that little detail.

Note That.

If you asked to enter pin code then enter 0000 else read how to reset pin-code

There are some Smart Smart TV models where you will be required to enter a different sequence in order to be able to factory reset your TV. Therefore if you have one of these models, then all you need to do is enter the following keys;

  • Press the Mute key.
  • Number 1 key.
  • The number 8 key.
  • Press the number 2 key.
  • And the Power key.

Remember that the procedure does not change, press the keys simultaneously and the same results will be affected on your Smart Smart TV.

Fourth Step.

In this step, you need not do anything at all as the rest is just automated and the TV’s system will carry it out automatically by itself. The Smart Smart TV will boot itself while it is in service mode. Just wait a few moments for this to be done and your TV will be good. Don’t press anything or do anything as this procedure is ongoing.

Fifth Step.

What you need to do now is go to the options menu on your remote and press factory reset. This will enable all the settings to be restored back to their original mode and your TV will do all these. Again, don’t press anything or do anything to the TV while this is ongoing as you might interfere with the process.

Your TV will ultimately turn off after this.

Don’t panic, the next procedure will tell you what you need to do so that you can complete this procedure as it is almost done.

The Last Step.

Now you can turn on your Smart Smart TV. After you have done this, then all you need to do is set it up and the procedure is done.

See, that wasn’t so hard and you have seen that you really needed no expert knowledge to be able to do this. Your Smart Smart TV is now reset and you can enjoy watching it as you have always done. This procedure is simple, just follow the steps.

Replace the Remote

If troubleshooting and resetting the remote do not fix it, then it is possible that the remote itself is defective. You need to replace the remote in this case. Either contact Smart to order a replacement remote or purchase a universal remote to replace your Smart TV remote. Check that the universal remote is compatible with your Smart TV by looking up the remote compatibility on the universal remote’s website.

The best universal remote can unify all your clickers — soundbar, Apple TV, surround speakers, Blu-ray player, Roku streaming stick, and more devices– into a single wand with buttons in a way that can feel almost magical. All the best universal remote options have superior ergonomics, more intuitive buttons, and a better feel than standard remotes.

Many remote controls have apps to ensure they work with your mobile device whether you have an Android, an iPhone, or another smartphone. A universal remote can also work with smart devices and voice systems such as Google Home and Amazon Alexa.

Your smartphone, the other remote

The latest Smart TVs offer the convenience of operating them through remote control apps that you can install on your mobile. So now when you’re lying on the couch with your phone in hand, you don’t have to get up to find the remote to turn on the TV, because with a TV remote app you can just press the Power On button to do it. And once it’s on you can then easily change channels, adjust the volume, and more all from within the same app on your phone.

Note: You need an Android device running Android 4.3 or higher to use the Android TV Remote Control app. Learn how to check your Android version.

Set up the remote control app

  • On your phone, download the Android TV Remote Control app from the Play Store.
  • Connect your phone and Android TV to the same Wi-Fi network.
  • On your phone, open the Android TV Remote Control app Android TV Remote.
  • Tap the name of your Android TV.
  • If it doesn’t show up, try troubleshooting
  • A PIN will appear on your TV screen.
  • On your phone, enter the PIN. Then, tap Pair.


After reading through the review above, we believe if you were having problems with your smart tv remote, you should be able to solve that issue now. The information has been simplified, and have been made understandable.